Форум (онлайн-игры, travian).

Основная категория => Форум о фрилансе... => Тема начата: gurvaq89 от Февраль 01, 2012, 05:49:59



Название: information _LED LED display brightness _led .txt
Отправлено: gurvaq89 от Февраль 01, 2012, 05:49:59
this new database is consistent and the layout of the density in one direction by a fixed distance between the polysilicon, the best lithography model, while improving process conol to reduce the size of area. reduce the size of the standard cell gate density database can reach 1 million per square millimeter gate. reduce the size of the standard cell library provides the same performance and energy performance, will ace the aditional sucture of 9 (9-ack configuration) re-designed 8-ack configuration. this database also contains a wide range of threshold voltage selection and energy management components, with a range of characteristics of the critical test (characterization corners). design infrasucture marketing at tsmc juang.led sign (http://www.flashingboards.com/)
advertising led display advertising primarily to advertising revenue to a profitable investment, but how to design led display to atact attention to it. mainly from the following points to consider 1, rational planning and installation location of the display area, based on viewing distance and viewing angle and surrounding environment, and display requirements, rational planning and location of display area. rather than to the pursuit of large area, the location significantly. 2, play content selection and design of large-scale giant screen is the public media, there are public service, advertising category, insuctions and so on. we choose to play the content, requirements must be agreed with the public to avoid resist seeing a psychologist. 3, select high-quality led display, the effect is certainly better, do not buy some to poor quality led display, no matter how ineffective the location can not atact advertisers to serve ads. neon sign (http://www.flashingboards.com/)
this article will analyze in detail the working principle of this device. the basic principles of charge pump capacitor is a charge or used to store elecical energy, and at the appointed time to the default rate will be the release of the components. figure 1   from a voltage source for charging the capacitor (figure a and b is the ideal situation, c, and d is the actual case). if an ideal capacitor in an ideal voltage source vg is charged (see figure 1a), will be based on immediate memory function dirac charge current pulses (fig. 1b). the total amount of stored charge calculated as follows   q = cvg actual capacitor with equivalent series resistance (esr) and equivalent series inductance (esl), both of which will not affect the ability of capacitors to store energy. however, they switched capacitor voltage converter on the overall conversion efficiency has a great influence. led message board (http://www.flashingboards.com/)