technically the general power supply manufacturers can not achieve this level yet, which is highlighted moso led power supply in the market, competitive advantage of technology and quality, so moso led drive power to achieve volume of business in order to achieve high-volume materials procurement, but also reduce material costs and product costs. standardization, indusialization, led indusy chain in order to batch, to minimize the cost of the led lamps, so the cost of the competition with the aditional lamp, the greater advantage. to this end, shenzhen led led indusy association is stepping up efforts to develop standards to regulate the led indusy, the rapid development of led indusy healthy. energy saving, emission reduction products will become the future mainseam of eleconic products led drive power for the future ends, environmental protection, high efficiency, is the future end of eleconic products, energy saving, emission reduction products, eleconic products will become the mainseam of the future.
flashing boards, compared with about power consumption can be reduced by half. in addition, the cost of high-brightness led technology with tends to decrease, which is popular led headlamps to one of the reasons. for example, ls600h uses four led components to form the beam light (figure 3). three of which are components of the projector lens, one is the use of mirror components. components of the projector lens reflection by the level of use of mirrors to the top of the configuration of the led emitted light, and then carried through the projection lens with light. the only mirror mirror on the component level through the configuration of the led emitted light to the bottom of the light disibution. figure 3: ls600h led headlamps used in the composition of the three components of the projection lens and a small mirror with a total of four component parts to form the near led to light.
multi-color sign board characterized by decomposition of the waste fluorescent lamps eatment, the use of partially made of recycled parts and materials used fluorescent tubes for sale. if all use of the old pieces of glass tube, phosphor mixed with 30% recycled products, quality and price and quite new, and give priority to sales and the provision of waste lamps users, which also is the first case in japan. 2001, sold 100,000 in 2002 to 20 million. japan's fuji storage indusy companies and the u.s. large enterprises regeneration device, developed in 2001 with the gasification of waste recycled mercury fluorescent tube technology, the washing method than in the past cost reduced by 10% to 15%, and because they do not mercury-containing water eatment plant consuction, investment than in the past to reduce the 1 / 2, april 2002 workshop built in the device samukawa, when dealing with three million waste fluorescent tubes.
neon led writing board
