money goes on the market , patent dispute and should reciprocity develops and c

this component will use the projection lens and mirror components using the combination, thus forming the headlamp light disibution characteristics required for the practice of the same with other models. however, increasing the brightness of each led, so future models ls600h used to reduce the number of led components, by using two components of the projection lens and a mirror of the three components. benefit from this, the cost will be reduced. in addition, toyota's led headlamp with a small wire produced by the manufacturer. combination of multiple components with light figure 4: i-miev schematic disibution of light radiation through a narrow range of optical components and condenser components, as well as exposure to radiation from short range and a wide set of optical components of the three pieces be combined to form the required light disibution.banner sign
which includes the forced cooling, cooling down, liquid cooling and other dozens of new patents and patents, to work together to light the world. also note the development of related technology: at present the led chip and packaging technology continues to improve tj can withstand temperatures up to 100 or more, life can reach more than 50,000 hr & helli. but never can not change the physical properties of silicon materials, "in luminosity and temperature tj rise in inverse proportion to ", tj the higher temperature, lower light efficiency. (see annex 2.pdf) cree tj = 25 mark is set to 100% optical efficiency; when tj = 75 to 85 optical efficiency of attenuation %; when tj = 125 to 70% efficiency of light attenuation (ie, just do a good job has reached a new lamp l70, 30% of lumen), so the efficiency of light and life can not be confused, confuse audio, led factory deliberately emphasized their tj 125.neon light sign
currently, philips, panasonic, ge and other large lighting manufacturers have begun recycling waste lamps, mainly through its own sales channels recycling of used fluorescent tubes, but only if their lamp manufacturers. 2.2 pollution abatement in sweden by foreign sales system recovery and community recycling two parallel channels of waste home appliance recycling, both with each other to form an effective recycling system. the vendor selling elecical and eleconic products, the customer can return the function similar to the old free eleconic products, that is, through the store "ade" recovery can also be collected at designated collection points, recycling, and then charge by the manufacturer (or commissioned) delivered to the preeatment plant dismantling; the other channels are provided by the local government is responsible for closed containers, collection of consumers can not "ade" of waste elecical and eleconic products, garbage collection points are set for each a waste home appliances recycling bins, discarded can only put inside, not out to take to prevent back flow of waste household appliances society. display banners